We offer Halal and Kosher Fumaric Acid made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility, Anmol Chemicals a mubygroup company involved in manufacturer of Speciality Chemicals, Pharmaceutical Excipients, Food & Flavor chemicals. The group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa USA & china.
The units in the group have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Home ---------- Contact

CarboyBarrelsBags PalletBig BagFumaric Acid

Fumaric Acid SDS of Manufacturers

Specifications of Fumaric Acid

Encapsulated Fumaric Acid


Fumaric Acid GHS SDS, MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: 2-Butenedioic acid; Boletic acid
CAS No.: 110-17-8
EINICS EC-No.: 203-743-0
Molecular Weight: 116.07
Chemical Formula: HOOCCH=CHCOOH

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Serious eye damage/eye irritation Category 2A

Labelling according Regulation (EC) No 1272/2008


GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H319: Causes serious eye irritation.

Precautionary statements:
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.

HMIS (Perceived): Health hazard: 1, Flammability: 1, Physical hazards: 0
NFPA (Perceived): Health hazard: 2, Fire: 1, Reactivity Hazard: 0

Classification according to Regulation (EC) No 1272/2008:
Eye irritation (Category 2), H319
For the full text of the H-Statements mentioned in this Section, see Section 16.
Label elements according to Directive 67/548/EEC:
Symbol
: Xi Irritant.
Risk Phrases: R36 – Irritating to eyes.

3. Composition/Information on Ingredients

Ingredient: Fumaric Acid
CAS No.: 110-17-8
EINICS EC-No.: 203-743-0
Percent: 100%

4. First Aid Measures

Always get medical attention after the first aid is over.

Inhalation: If Fumaric Acid is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill:
Corrosive solid. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition sources.

7. Handling and Storage

Keep Fumaric Acid in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Fumaric Acid may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust and/or static electricity. Empty only into inert or non-flammable atmosphere. Emptying contents into a non-inert atmosphere where flammable vapors may be present could cause a flash fire or explosion due to electrostatic discharge.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Fumaric Acid is white to off-white crystals or powder.
Odor: Faint odor.
Solubility: Soluble in water.
Density: 1,63 g/cm3 at 20 °C
pH: Approximately 2, Acidic.
% Volatile by volume @ 21C (70F): 0
Molecular Weight: 116.07
Chemical Formula: HOOCCH=CHCOOH
Melting Point: 298 - 300°C - lit.

10. Stability and Reactivity

Stability: Fumaric Acid is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Excessive heat, Strong oxidizers.
Conditions to Avoid: Heat, dusting and incompatibles.

11. Toxicological Information

LD50 Oral - Rat - female: 9.300 mg/kg
LD50 Dermal - Rabbit - female: 20.000 mg/kg
LD50 Intraperitoneal - Mouse: 100 mg/kg
--------\Cancer Lists\-----------------------------------------
------------------------- NTP Carcinogen---
Ingredient -------------- Known -- Anticipated -- IARC Category
------------------------- -------- -----------    -------------
Fumaric Acid (110-16-7) --- No ----- No -------- -- None

12. Ecological Information Toxicity

Toxicity to fish daphnia and bacteria:
Toxicity to fish mortality: Danio rerio (zebra fish) - 245 mg/l - 48 h
Toxicity to fish semi-static test LC50: Danio rerio (zebra fish) - > 100 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates Immobilization EC50: Daphnia magna (Water flea) - 212 mg/l - 48 h
Toxicity to algae Growth inhibition EC50: Pseudokirchneriella subcapitata - > 100 mg/l - 72 h
Toxicity to bacteria Respiration inhibition EC50: activated sludge - > 300 mg/l - 3 h
Bioaccumulative potential: No data available
Mobility in soil: No data available

This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Fumaric Acid in accordance with legal requirements.

14. Transport Information

DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated

15. Regulatory Information

USA Regulations:
Comprehensive Environmental Response and Liability Act (CERCLA): This material is not subject to any special reporting under the requirements of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA).
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
The reportable quantity (RQ) for this material is 5000 pounds. If appropriate, immediately report to the National Response Center (800/424-8802) as required by U.S.Federal Law. Also contact appropriate state and local regulatory agencies.
Toxic Substance Control Act (TSCA): All components of this product are listed on the TSCA inventory list.
SARA Section 311/312 (40 CFR 370) Hazard Categories: Acute Health Hazard, Chronic Health Hazard.
SARA Section 313 (40 CFR 372) Hazard Categories: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
Clean Water Act: None of the chemicals in this product are listed as Hazardous Substances under the CWA.
Clean Air Act: None of the chemicals in this product are listed as Hazardous Substances under the CCA.
California Prop 65: This product contains no chemical known by the State of California to cause cancer, birth defects or other reproductive harm.

EINICS EC-No.: 203-743-0
Label elements according to Directive 67/548/EEC
Symbol
: Xi
Risk Phrases: R36 – Irritating to eyes.
Safety Phrases:
S16 - Keep away from sources of ignition - No smoking.
S3 - Keep in a cool place.
S9 - Keep container in a well-ventilated place.
S13 - Keep away from food, drink and animal feeding stuffs
S24 - Avoid contact with skin.
S25 - Avoid contact with eyes.
S36 - Wear suitable protective clothing.
S37 - Wear suitable gloves
S29 - Do not empty into drains.
S45 - In case of accident or if you feel unwell, seek medical advice immediately.
S56 - Dispose of this material and its container to hazardous or special waste collection point.

Canada WHMIS Hazard: D2B Toxic materials.

16. Other Information

H319 =Causes serious eye irritation.
Xi =Irritant.
R36 = Irritating to eyes.

Disclaimer:
******************************************
Our company provides this Fumaric Acid MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
******************************************

Fumaric Acid Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

ISO 9000

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, Holland, Norway, etc.

Copyright and Usual Disclaimer is Applicable